Технические характеристики IC660BBD100
Бренд «GE fanacco»
Серия гениев I-O
Серийный номер IC660BBD100
Опишите блок ввода/вывода цепи
Цепь 8.
Напряжение 115 вольт переменного тока
Изолированное напряжение 1500 вольт
Введите 16.
Дистанция 28 ватт
Номинальное значение порта 5 ампер
Температура 0-60 градусов по цельсию
Частота 50 на 60 герц
Technical specifications for IC660BBD100
Brand GE Fanuc
Series Genius I-O
Part number IC660BBD100
Describes the circuit I/O block
Circuit 8
Voltage 115 volts AC
Isolation voltage 1500 volts
Input 16
Dissipated 28 watts
Terminal plate rating 5 amps
Temperature 0-60 degrees Celsius
The frequency is 50/60 Hertz
The GE Fanuc IC660BBD100 I/O block is a 115 volt AC rated I/O block. It is a circuit I/O block with 1 set of 8 circuits. Each circuit of the module can act as input, output, or tristate input. It is manufactured by GE Fanuc Automation in series 90-70 and is used in different industrial and manufacturing sectors. The module operates at a frequency of 50 to 60 Hertz. The I/O module comes with eight inputs that can be connected to a programmer, controller, or monitoring device to monitor different configurations using ports located at the top of the module. The module is also equipped with serial controller ports called ports 1 and 2. The IC660BBD100 I/O block is compatible with the 90-30 series and 90-70 series GE PLC systems. The block can be connected to a personal computer and can be configured using the Microsoft Windows XP operating system.
The GE Fanuc IC660BBD100 I/O block is equipped with different LED indicators on the front. It has an «I/O Enabled» LED and a «Unit OK» LED that lights up when there is an application in progress. This module has unique features, including optional thresholds and advanced diagnostics. The serial bus isolation of the grounding input or module is 1500 V. The IC660BBD100 I/O block is capable of emitting a maximum of 28 watts of heat when connected to 16 inputs at full load. The terminal plate of the block is rated for 5 amps. The ambient temperature for normal operation should be set between 0 and 60 degrees Celsius.
