Technical specifications for IC660BBD026
Brand GE Fanuc
Series Genius I-O
Part number IC660BBD026
Describes the Genius I/O module
The frequency is 50/60 Hertz
Voltage 12/24 volts DC
Input 16
Operating temperature 0-60 degrees Celsius
Protect against overheating and short circuit
Short circuit limit 30 amps for the first line cycle
Storage temperature -40-100 degrees Celsius

The IC660BBD026 block is an I/O circuit block manufactured by GE Fanuc. It has a rated voltage of 12 to 24 volts DC. The front end of the module has 16 input points. Input is equipped with LED indicator. The LED lights up whenever a connection is made with a specific input. The IC660BBD026 I/O circuit blocks can be easily connected to different GE PLC components. It can be connected to a handheld programmer or controller using a monitoring port in the upper left corner of the block. The IC660BBD026 I/O circuit block provides interface options for different discrete, analog, and field devices. The I/O block has advanced diagnostic capabilities and can be easily configured by connecting it to a personal computer using the 2 serial ports in the block.

In addition to the serial port, the front of the IC660BBD026 I/O circuit block has a Shield In port and a Shield Out port. There are two LED indicators near the monitoring port for «I/O Enabled» and «Unit OK» status updates. The IC660BBD026 I/O circuit module has an open wire for three-state input. It has an «overheat error» switch option, which plays a vital role in protecting the system in the event of an overheat error. If the output instantaneous current exceeds 30 amps during the first-line cycle, the system has a short-circuit diagnosis function. The ambient operating temperature of the IC660BBD026 I/O circuit block should be maintained between 0 and 60 degrees Celsius for normal operation, and can be stored at a temperature between -40 and 100 degrees Celsius when not in use.